Tee
An equal tee for taking a branch off a line at 90°. The branch is reinforced and the run is banded, so the fitting carries the same pressure rating as the pipe it sits in.
130
1/2″ – 4″ (DN 15 – 100)
Specifications
| Catalogue code | 130 |
| Sizes | 1/2″ – 4″ (DN 15 – 100) |
| Material | Black-heart malleable iron KTH330-08 |
| Mechanical | Tensile ≥ 330 MPa, elongation ≥ 8 %, hardness ≤ HB 150 |
| Working pressure | 1.6 MPa, up to 200 °C |
| Threads | ISO 7/1 (BSP), NPT on request |
| Standards | EN 10242, ISO 49, GB/T 3287, DIN 2950, ANSI/ASME B16.3 |
| Approvals | FM Approved, UL Listed |
| Finish | Black, hot-dip galvanised, electro-galvanised |
Need this part in a specific size or finish?
Send the size list and the destination port. We quote from the factory, with a material certificate on every shipment.