Reducing tee
Cuts a smaller branch into a larger grooved main. The reducing outlet is cast in, not welded on, so there is one joint fewer to leak and no heat-affected zone in the coating.
XGQT4
76 × 60 mm – 323 × 273 mm
Specifications
| Catalogue code | XGQT4 |
| Sizes | 76 × 60 mm – 323 × 273 mm |
| Material | Ductile iron QT450-10 (EN-GJS-450-10) |
| Working pressure | 1.2 / 1.6 / 2.5 MPa |
| Standards | GB 5135.11-2006, UL Listed |
| Approvals | UL Listed — FM application in progress |
| Finish | Red or orange epoxy, hot-dip galvanised on request |
| Gasket | EPDM for water, NBR for oil and gas (on request) |
Related products
Need this part in a specific size or finish?
Send the size list and the destination port. We quote from the factory, with a material certificate on every shipment.